14.1.8 Select drive program, drive
The power wheelchair must be in driving mode.
›
The last selected drive program is shown on the display (profiles 1
to 5). Drive profiles 1 to 5 are further divided into 5 levels once you
drill down.
Press the switch upwards ① or downwards ② to switch to a higher or
lower sub-level.
›
The selected drive program and sub-level will appear on the display.
Push the joystick in the direction in which you wish to travel.
›
The power wheelchair moves in the selected direction.
①Move forwards
② Turn to the right
③ Move backwards
④ Turn to the left
)
)
See section "3 Safety notes"
Controls
Fig. 53: Select drive program
①
④
②
③
Fig. 54: Joystick travelling direction
①
②
85