Select Drive Program, Drive; Fig. 90: Select Drive Program; Fig. 91: Joystick Travelling Direction - Paravan WHEELCHAIR Series Operating Instructions Manual

15.2.8

Select drive program, drive

The power wheelchair must be in driving mode.
> The last selected drive program is shown on the display.
Press the profile key ① to select/switch to one of the 5 movement levels
(profiles).
> The selected drive profile will appear on the display.
Press the relevant key to select a higher ② or lower ③ maximum end
speed in the respective drive profile.
> The preference within the drive profile will appear on the display.
Push the joystick in the direction in which you wish to travel.
> The power wheelchair moves in the selected direction.
① Move forwards
② Turn to the right
③ Move backwards
④ Turn to the left
)
See section "3 Safety notes"
116
③

Fig. 90: Select drive program

①
④
③

Fig. 91: Joystick travelling direction

①
②
②
Controls