Login; Set Unlock Pattern - HIKVISION HiLook NVR 104MH-D/4P User Manual

What to do next
Follow the wizard to set basic parameters.
● When you forget your password, there are three methods to reset it, including password
resetting email, HiLookVision, and security questions. You have to configure at least one
password resetting method. Refer to Set Password Resetting Email and HiLookVision for
details.
● For unlock pattern. Refer to Set Unlock Pattern for details.
● For general system parameters. Refer to General for details.
● For general network parameters. Refer to General for details.
● For storage device configuration. Refer to Storage Device for details.
● For adding network cameras. Refer to Network Camera for details.
● For platform configuration. Refer HiLookVision to for details.

1.2 Login

1.2.1 Set Unlock Pattern

Admin user can use the unlock pattern to login. You can configure the unlock pattern after the
device is activated.
Steps
1. Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the
pattern is done.
Note
● The pattern shall have 4 dots at least.
● Each dot can be connected for once only.
2. Draw the same pattern again to confirm it.
When the two patterns match, the pattern is configured successfully.
Network Video Recorder User Manual
Figure 1-2 Set Unlock Pattern
2