Card Options - Mircom TX3 Series Installation And Operation Manual

2.3.12

Card options

26 (61)
LT-980
Inhibit ID. When enabled the card code is not sent to the PC. This feature is used
for logging and reporting purposes.
Timed Anti-passback. When enabled access is not permitted at the same access
point for a specific amount of time specified by the anti-passback timer.
Access cards are configured for the following features:
Usage counter. The usage counter is used for temporary cards. The usage
counter can be given any value from 1 to 255. Using 255 means there is no
restriction on usage. If any other value is used it means the card is only usable for
that number of times.
Status. The status of the access card is marked as:
• Active
• Inactive
Inactive cards are not granted access. Active cards are granted access provided
all the other conditions like schedule and privilege are met.
Access level. Select the access level for the card. Access levels are configurable
on the basis of privilege. Up to 128 access levels can be defined for the system.
PIN. The PIN code is a 1 to 4 digit numerical value used during the card + PIN
schedule. 0 is not accepted.
Ignore anti-passback. When this option is enabled the card holder is not
restricted by the timed anti-passback mode.
Lock/Unlock privilege. When this option is enabled the user has the privilege of
unlocking the door by presenting the card to the reader twice in succession.
High security privilege. When this option enabled only access cards with this
privilege are able to open the door.
Extended unlock time. When this option is enabled the door opens for the
extended unlock time (see section 2.4.3, Extended unlock time). This option is
normally given to seniors and persons with disabilities.
Handicap. When this option is enabled the output designated as accessible is
activated along with the main door.
First person in. This option works in conjunction with scheduled unlock modes
only. If the First person in setting is enabled, only a card with the First person in
privilege can start the unlock mode.
TX3-CX Card Access System Installation and Operation Manual
Copyright 2015
Configurable Features
Version 2.2