Table of Contents
Advertisement
2.3.1
Lock / Unlock
2.3.1.1
Changing the lock/unlock mode
Version 2.2
LT-980
The following features are configurable:
•
Lock / Unlock
•
High security
•
PC decision required
•
Facility code
•
Card + PIN
•
Anti-passback
•
Temporary card
•
Interlock
•
Access Level
•
Controller options
•
Access point options
•
Card options
An access point has one of the following lock status modes:
Lock Mode. When in lock mode the door is normally locked. Any valid access
card unlocks the door for the duration of a specified time interval according to:
•
door unlock time
•
extended unlock time
During this mode the red LED on the card reader associated with this access point
becomes active and turns green for the duration the door is unlocked.
Unlock Mode. When in unlock mode the door is unlocked. The green led on the
reader associated with this access point stays lit. During this mode the door sense
is not monitored for the following:
•
door did not open
•
door held open warning
•
force entry alarm
The lock/unlock mode is changed in one of the following three ways:
•
an administrator using the configurator can send a command to change the
lock mode
TX3-CX Card Access System Installation and Operation Manual
Copyright 2015
Configurable Features
21 (61)
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers