Grounding Methods - HP StorageWorks Modular Smart Array 1500 cs Installation Manual

Electrostatic Discharge

Grounding methods

There are several methods for grounding. Use one or more of the following
methods when handling or installing electrostatic-sensitive parts:
If you do not have any of the equipment suggested for proper grounding, either
have an HP Authorized Reseller install the part or discharge any potential static by
touching a piece of sheet metal immediatly before touching the component or the
MSA1500 cs.
Note:
contact your HP Authorized Reseller.
84
Use a wrist strap connected by a ground cord to a grounded workstation or
computer chassis. Wrist straps are flexible straps with a minimum of 1
megohm ± 10 percent resistance in the ground cords. To provide proper
ground, wear the strap snug against the skin.
Use heel straps, toe straps, or boot straps at standing workstations. Wear the
straps on both feet when standing on conductive floors or dissipating floor
mats.
Use conductive field service tools.
Use a portable field service kit with a folding static-dissipating work mat.
For more information on static electricity, or assistance with product installation,
Modular Smart Array 1500 cs Installation Guide