Japanese Power Cord Notice; Bsmi Notice; Laser Compliance - HP StorageWorks Modular Smart Array 1500 cs Installation Manual

Japanese power cord notice

BSMI notice

Laser compliance

The SFP Module contains a laser diode of either gallium aluminum arsenide
(GaALAs) emitting in the wavelength range of 770-860 nm, or indium gallium
arsenide phosphide (InGaAsP) emitting in the wavelength range of 1270-1355
nm. All HP systems equipped with a laser device comply with safety standards,
including International Electrotechnical Commission (IEC) 825. With specific
regard to the laser, the equipment complies with laser product performance
standards set by government agencies as a Class 1 laser product. The product does
not emit hazardous laser radiation.
Modular Smart Array 1500 cs Installation Guide
WARNING: Use of controls or adjustments or performance of procedures
other than those specified herein or in the laser product's installation guide
may result in hazardous radiation exposure. To reduce the risk of exposure to
hazardous radiation:
Do not try to open the unit enclosure. There are no user-serviceable
components inside.
Do not operate controls, make adjustments, or perform procedures to the
laser device other than those specified herein.
Allow only HP Authorized Service technicians to repair the unit.
Regulatory Notices
79