[Install] Set Userauth; [Install] System Option - HP StorageWorks P9000 Reference Manual

Basic information
Parameter
TOD Change
Synchro. Infor.
Detailed information
Item
Time
Use Synchro.
SNTP IP
SNTP Port
Time Zone
Check Time
Create SIM

[Install] Set UserAuth

Example
07xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set UserAuth,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,UserAuth}=[{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=1
Detailed information
Item
LDKC:CU:LDEV
UserAuth
Num. of LDEVs

[Install] System Option

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],System Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Spare Disk Recover=Full Speed
+Disk Copy Pace=Slower
+Copy Operation(Correction Copy)=OFF
+Copy Operation(Dynamic Sparing)=OFF
+Read Configuration Data Mode=OFF
Description
The date and the time.
The setting of time correction function.
Description
Indicates the date and the time in the format of "YYYY/MM/DD HH:mm:SS".(YYYY: year,
MM: month, DD: date, HH: hour, mm: minute, SS: second).
Indicates whether the time correction function is valid or invalid.
Valid: Enable, Invalid: Disable
The IP address (IPv4 or IPv6) of SNTP server.
The port used by SNTP server.
The time zone.
The time when the time correction function is executed. Only HH (Hour: 00 to 23) is indicated
for the execution time.
Indicates whether the SIM was created or not when the setting of time correction failed.
ON: Created, OFF: Not created.
Description
The LDKC, CU, and LDEV numbers of the volume where the user authentication is specified.
Indicates whether the user authentication is enabled or disabled.
Disable or Enable will appear.
The number of logical volumes where the user authentication is set.
Install descriptions 91