HP StorageWorks Modular Smart Array 1500 cs Installation Manual page 33

4. Install the component in the rack:
Figure 7: Installing the device in the rack
Figure 8: Securing the device to the front of the rack
Modular Smart Array 1500 cs Installation Guide
a. Remove the bezel from the front of the device, align the device with the
rails, and slide it into the rack.
b. Slide the device into the rack until the front edge is flush with the front of
the rack 1.
c. Secure the device to the front of the rack using the provided thumbscrews
on the front of the device 2 and then replace the front bezel.
Installation Procedures - All Deployments
2
1
33