Windows Server 2008 And Server Core Option; Prerequisites; If Installing The P4000 Dsm For Mpio Into An Existing Microsoft Cluster; Install The P4000 Dsm For Mpio - HP StorageWorks P4000 User Manual

Windows Server 2008 and Server Core option

NOTE:
The preferred update order is to update the P4000 DSM for MPIO first, then update the SAN/iQ
software.

Prerequisites

• 32-bit or 64-bit version of Windows Server 2008, the Server Core, Windows Server 2008 R2,
or R2 Server Core installations
• The Microsoft iSCSI Initiator, which comes installed with all Windows Server 2008 and the Server
Core installation
• The Microsoft Multipath IO optional component installed

If installing the P4000 DSM for MPIO into an existing Microsoft cluster

1. Move all cluster resources and related file shares to one system that will stay active.
2. Pause the system that holds no resources and install the P4000 DSM for MPIO.

Install the P4000 DSM for MPIO

Installing the P4000 DSM for MPIO requires a server reboot to complete the installation.
1. Insert the HP StorageWorks P4000 Windows Solution Pack CD in your CD drive.
2. Click Install.
3. Select HP StorageWorks P4000 DSM for MPIO from the Installation menu.
The installation wizard takes you through the installation process for the P4000 DSM for MPIO.
4. Reboot the server to complete the installation.

Silent install for Windows Server 2008 Server Core option

To perform a silent install:
1. Open a command prompt and use the cd command to navigate to setup.exe in the installation
media.
2. Type the following command:
setup /s /f1".\setup.iss"
The setup begins. You will see nothing until after a minute or two, when the server reboots.
3. When the server is back up, check \Windows\dsminstall.log for errors.

Uninstalling the P4000 DSM for MPIO

Uninstalling the P4000 DSM for MPIO requires a reboot of the system.
To uninstall the P4000 DSM for MPIO:
P4000 Windows Solution Pack user guide 11