Configuring The Storage - HP StorageWorks Modular Smart Array 1500 cs Installation Manual

Configuring the storage

Thorough planning is critical to the successful and efficient deployment of any
storage array system. As discussed in Chapter 1:
All Deployments" on page 15, plans should include decisions about total system
capacity, fault-tolerance, performance, and availability.
Storage configuration tasks include:
Note:
Verify that both HBAs in each server have been granted access to the storage.
Refer to the Secure Path documentation for additional configuration information.
Perform these tasks using your chosen configuration utility. Refer to the
appropriate user documentation for procedural instructions.
Go to
(LUN)
Modular Smart Array 1500 cs Installation Guide
Creating arrays (LUNs)
Identifying the operating system of each HBA connected to the MSA1500 cs
Entering Selective Storage Presentation (SSP) or Access Control List (ACL)
settings to isolate the storage from unauthorized access
In multi-path configurations:
Table 12: "Hard Drive
Information" on page 96 to record information about your LUNs.
Configuration Procedures - Linux Environments
"Installation Procedures -
Information" on page 92 and Table 13: "Array
71