Configuration Procedures - Netware Environments; Prerequisites - HP StorageWorks Modular Smart Array 1500 cs Installation Manual

Configuration Procedures -
NetWare Environments
Deploying the MSA1500 cs in a NetWare environment involves:
1.
2.
3.
4.
These procedures are discussed in the following paragraphs.
Note:
and in chapter 1 of this guide. There are specific dependencies and if you deviate from
this sequence, you may have to uninstall and then reinstall your MSA1500 cs.

Prerequisites

Modular Smart Array 1500 cs Installation Guide
Completing all Prerequisites, page 73
Installing the HBA Driver on your NetWare
Installing Insight Manager on your NetWare servers
Configuring the storage, page 76
HP recommends installing your MSA1500 cs in the sequence of steps listed here
Install and connect all equipment correctly, as detailed in
Procedures - All Deployments" on page 15.
Obtain the documentation for the storage configuration tool you plan to use.
Documentation for the ACU and the CLI are available on the MSA1500 cs
Documentation CD.
4
servers, page 74
(optional), page 75
"Installation
73