Scope Of Supply - Peak PCAN-MicroMod FD User Manual

Windows 10, 8.1 (32/64-Bit)
PC-CAN interface from PEAK-System (CAN FD capability recommended)
CAN cabling between the CAN interface and the PCAN-MicroMod FD Analog 1 with
proper termination (120 Ω on each end of the CAN bus)
Note: The transfer of the configuration and a firmware update
are done with CAN 2.0 messages. For this reason, all PC-CAN
interfaces from PEAK-System work in principle for this purpose.
We recommend the use of CAN-FD-capable interfaces in order
to activate the necessary operation modes of the PCAN-
MicroMod FD Analog 1 also during CAN FD operation in a simple
way.

1.3 Scope of Supply

PCAN-MicroMod FD
Motherboard in aluminum casing
One mating connector each for both connections
PCAN-MicroMod FD Configuration for Windows
Manual in PDF format
1 Introduction PCAN-MicroMod FD Analog 1
User Manual 1.2.0 © 2021 PEAK-System Technik GmbH
6