Status Leds - Peak PCAN-MicroMod FD User Manual

3 Status LEDs

LED indic-
LED
ation
Green blinking
(1 Hz)
Green faster
blinking (2 Hz)
Activity Orange quick
blinking (4 Hz)
Red blinking
Red on
Power Green on
Error No function
* See also 6 Firmware Update on page 17.
3 Status LEDs PCAN-MicroMod FD Analog 1
User Manual 1.2.0 © 2021 PEAK-System Technik GmbH
LEDs on the PCAN-MicroMod FD Analog 1
Device status
Normal operation
No configuration with
the set module ID
CAN bootloader
active
Configuration invalid
No valid firmware*
Supply voltage
present
Comment
The PCAN-MicroMod FD is ready for receiving a confi-
guration with 500 kbit/s.
Ready for transfer of new firmware.*
Specific parameters of the transmitted configuration
are not supported, for example the bitrate
10