Configuration Software; System Requirements Configuration Transmission; Downloading And Installing The Configuration Program - Peak PCAN-MicroMod FD User Manual

5 Configuration Software

With the configuration program PCAN-MicroMod FD Configuration for Windows, you
can create, edit, and then transfer configurations via CAN to one or more CAN nodes
with PCAN-MicroMod FD (for example the PCAN-MicroMod FD Analog 1).
5.1 System Requirements Configuration
Transmission
Windows 10, 8.1 (32/64-Bit)
PC-CAN interface from PEAK-System (CAN FD capability recommended)
CAN cabling between the CAN interface and the PCAN-MicroMod FD Analog 1 with
proper termination (120 Ω on each end of the CAN bus)
5.2 Downloading and Installing the Configuration
Program
The software package for installation of PCAN-MicroMod FD Configuration is freely
available on our website.
Steps of the software installation:
1. Download the software package for PCAN-MicroMod FD Configuration from
our website. Go to the corresponding entry on the following download page:
www.peak-system.com/quick/DL-Software-E
2. Open the downloaded file PCAN-MicroMod-FD-Configuration.zip.
The contents of the ZIP file is shown.
5 Configuration Software
User Manual 1.2.0 © 2021 PEAK-System Technik GmbH
PCAN-MicroMod FD Analog 1
15