Peak Rider 2 Manual PRODUCT DESCRIPTION: Peak Rider 2 is a unique, flexible, and powerful sidechain dynamic processor. It can be used to match the volume envelope of one signal to another, subtract the volume envelope of one signal from another, expand a signal by combining the envelope of another audio signal with its own, or equalize a signal while retaining the exact dynamic characteristics.
Peak Rider 2 Manual QUICK-START GUIDE: This section is a short tutorial section intended to get new users quickly using Peak Rider 2 effectively. SETUP Load Peak Rider 2 onto the audio track you want to affect. ● Begin playing your audio looped.
Page 6
Peak Rider 2 Manual Change the timing controls at the bottom to start affecting the dynamic character of the ● signal. EQ MODE Begin adjusting the default EQ bands by dragging around their circular handles. ● Adjust the RANGE control to control the maximum amount of gain change.
If Peak Rider 2 is unregistered, the output of the plugin will be replaced with momentary noise, after which it will return to to normal behavior. If Peak Rider 2 does not detect a valid registration, it will display inside the center of the ‘Info Box’ a large red button with the text ‘Register Here’:...
UNDO/REDO Peak Rider 2 will remember each control you change while it’s open. Click the ‘Undo’ button to revert your latest change. Click the ‘Redo’ button to cancel an undo.
Page 10
Peak Rider 2 Manual In the preset menu, presets which utilize an external sidechain signal will be displayed with a small icon.
These controls affect the main properties of the plugin’s operation, including the dynamic processing mode, the range of effect, and the dynamic processing mix ratio. MODE knob changes the envelope matching mode of Peak Rider. Range: Exact, Noboost, Duck, Expand, EQ ■...
Page 12
Peak Rider 2 Manual Sensitivity LED’s in various gain stages. In EQ mode, up to 12 separate bands can be simultaneously enabled. The interface of Peak Rider 2 will change slightly when this mode becomes active. RANGE limits the amount of gain change.
Page 14
Peak Rider 2 Manual EQ MODE CONTROLS EQ mode is a brand new processing system available in Peak Rider 2. In this mode, the main input signal is initially copied to the sidechain input. The custom equalization processing is then applied to the main signal path, while the sidechain copy is unaffected.
Page 15
Peak Rider 2 Manual Range: 20 Hz to 20,000 Hz ■ EQ GAIN sets the currently selected band’s volume adjustment. Range: -24 dB to 24 dB ■ Default: 0 dB ■ EQ Q sets the currently selected band’s bandwidth/quality. Range: 0.5 Q to 10 Q ■...
Peak Rider 2 Manual FILTER VIEW GAIN controls the amount of output gain applied to the respective band. Range: -30 dB to 30 dB ■ Default: 0 dB ■ XOVER (crossover) sets the frequencies the sidechain input signal is filtered at.
Page 17
Peak Rider 2 Manual SOLO mutes the output of other, non-soloed bands. Range: Off, On ■ Default: Off ■ MUTE silences the output of the band. Range: Off, On ■ Default: Off ■ BYPASS skips match-processing of the band. Range: Off, On ■...
Peak Rider 2 Manual TIMING CONTROLS: These knobs give you control of how Peak Rider 2 converts your audio into envelopes during the main mode processing section. ATTACK sets the rise time (smoothness) of the envelope generators. Peak Algorithm ■...
Page 20
Some DAW’s treat the sidechain channels differently than others. As a fix for potential problems, Peak Rider 2 has a per-DAW option to clear the sidechain channels. If you experience issues when using an external sidechain, such as odd sounds coming from the plugin, you can try right-clicking the SC MODE switch and enabling sidechain channel clearing.
Page 21
Peak Rider 2 Manual SIDECHAIN INPUT SCREEN CONTROLS: The sidechain input screen enables processing directly on the input sidechain signal before it is processed by any dynamic modes. It allows you to change the panning and volume of the sidechain signal, apply filtering and equalization, and replace the signal with signal generators.
Page 22
Peak Rider 2 Manual SCEQ RESPONSE HANDLES are mouse draggable components that adjusts the frequency and gain of a SCEQ band. Each SCEQ band represents a single audio adjustment on the sidechain input signal. Range (X-Axis): 20 Hz to 20,000 Hz ■...
Page 23
Peak Rider 2 Manual FILTER SETTINGS WINDOW: SPECTRUM GAIN controls the visual magnification of the Spectrum and Envelope views. Range: 0 to 100 ■ Default: 50 ■ SPECTRUM/ENVELOPE controls whether the Spectrum view or Envelope view is displayed in the Filter View.
Page 24
Peak Rider 2 Manual EULA: The following license is granted non-exclusively to users of our plugin software. Overview All programming, scripting, code, algorithms, and graphical assets contained in this product are the intellectual property of Impact Soundworks unless otherwise noted, and remain the property of Impact Soundworks after the product is purchased.
Page 25
Peak Rider 2 Manual The licensee MAY NOT attempt to “reverse engineer” the plugin by any means, methods, techniques, algorithms, tricks, or analyses. “Reverse engineering” includes any attempts to expose, unpack, or extract code or algorithms from the plugin, including registration and authorization code.