Introduction; Properties At A Glance - Peak PCAN-MicroMod FD User Manual

1 Introduction

The PCAN-MicroMod FD plug-in board can be purchased together with ready-to-use
motherboards that provide peripherals for specific requirements. For the connection
of CAN, I/O, and power supply, spring terminal connectors are used.
The motherboard PCAN-MicroMod FD Analog 1 puts the emphasis on analog inputs
and outputs which are provided with appropriate protective circuitry.
The PCAN-MicroMod FD is configured using the supplied Windows software. In addi-
tion to simple I/O mapping to CAN IDs, function blocks are also available for
processing the data. The configuration created on the computer is transferred via
the CAN bus to the PCAN-MicroMod FD which then runs as an independent CAN node.
Multiple modules can be configured independently on a CAN bus.

1.1 Properties at a Glance

Motherboard in General
Board with plugged on PCAN-MicroMod FD
Aluminum casing with spring terminal connectors
Operating voltage 8 to 30 V
Extended operating temperature range from −40 to 85 °C (−40 to 185 °F)
High-speed CAN connection (ISO 11898-2)
Complies with CAN specifications 2.0 A/B and FD
CAN bit rates from 20 kbit/s up to 1 Mbit/s
CAN FD bit rates for the data field (max. 64 bytes) from 20 kbit/s up to
10 Mbit/s
CAN termination switchable
1 Introduction PCAN-MicroMod FD Analog 1
User Manual 1.2.0 © 2021 PEAK-System Technik GmbH
4