Properties At A Glance; System Requirements; Scope Of Supply - Peak PCAN-PC/104 Plus User Manual

1.1

Properties at a Glance

Form factor PC/104
■
Use of the 120-pin connection for the PCI bus
■
Up to four cards can be used in one system
■
1 or 2 High-speed CAN channels (ISO 11898-2)
■
Bit rates from 5 kbit/s up to 1 Mbit/s
■
Complies with CAN specifications ISO 11898-1 for CAN
■
Connection to CAN bus through D-Sub slot brackets, 9-pin
■
(in accordance with CiA® 303-1)
NXP SJA1000 CAN controller, 16 MHz clock frequency
■
NXP PCA82C251 CAN transceiver
■
Voltage supply for external devices via CAN connection can be connected through
■
a solder jumper
Galvanic isolation up to 500 V per CAN connection
■
(only for IPEH-002096 and IPEH-002097)
Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)
■
Optional available: PC/104-ISA stack-through connector
■

1.2 System Requirements

PC/104-Plus computer with Operating system Windows® 11 (64 bit), 10 (32/64 bit) or
Linux (32/64-bit)

1.3 Scope of Supply

CAN interface PCAN-PC/104 Plus
■
Slot bracket with D-Sub connectors for the CAN bus
■
1 Introduction PCAN-PC/104 Plus
User Manual 3.0.1 © 2022 PEAK-System Technik GmbH
5