Introduction - Peak PCAN-PC/104 Plus User Manual

1 Introduction

The CAN interface PCAN-PC/104 Plus for a PC/104-Plus computer is available as a
version with one or two channels. The CAN bus is connected via a 9-pin D-Sub
connector on the supplied slot bracket. Operation of up to four CAN interfaces
plugged into each other is possible.
Galvanic isolation up to 500 V for each CAN channel protects against the transmission
of electrical interference peaks between the CAN channels and the computer.
The monitor software PCAN-View and the programming interface PCAN-Basic for the
development of applications with CAN connection are included in the scope of
supply.
Device drivers exist for different operating systems, so programs can easily access a
connected CAN bus.
This manual describes the use of the CAN interface with Windows.
Device drivers and application information for Linux:
www.peak-system.com/quick/DL-Driver-E
At the end of this manual you can find a Quick Reference with brief
information about the installation and operation of the CAN interface.
1 Introduction PCAN-PC/104 Plus
User Manual 3.0.1 © 2022 PEAK-System Technik GmbH
4