2 Configuration
Before installing the CAN interface into a PC/104-Plus computer, you must configure
it using jumpers on the PCB.
Attention! Electrostatic discharge (ESD) can damage or destroy
components on the card. Take precautions to avoid ESD.
2.1 Position in the PC/104-Plus Computer
The CAN interface must be adjusted to a specific position in the stack by setting the
appropriate jumpers. The position number results from the distance to the host.
2 Configuration
PCAN-PC/104 Plus
User Manual 3.0.1
© 2022 PEAK-System Technik GmbH
7