Table of Contents
Advertisement
6 MAINTENANCE
6
MAINTENANCE
WARNING!
The mains supply must be disconnected during cleaning and maintenance.
CAUTION!
Only persons with the appropriate electrical knowledge (authorised personnel) may remove
the safety plates.
CAUTION!
The product is covered by manufacturer's warranty. Any attempt to carry out repair work by
non-authorised service centers or personnel will invalidate the warranty.
NOTE!
Regular maintenance is important for safe and reliable operation.
NOTE!
Perform maintenance more often during severe dusty conditions.
Before each use - make sure that:
•
Product and cables are not damaged,
•
The torch is clean and not damaged.
6.1
Routine maintenance
Maintenance schedule during normal conditions. Check equipment prior to every use.
Interval
Every 3 months
Every 6 months
0463 862 001
Clean or replace
unreadable labels.
Clean inside
equipment. Use dry
compressed air with
4 bar pressure.
- 28 -
Area to maintain
Clean weld terminals.
Check or replace weld
cables.
© ESAB AB 2023
Advertisement
Table of Contents
