Torque Specifications - EMG Lord Black Aluminium Operating Instructions Manual

MAINTENANCE | CARE
The stem should be positioned on the same axis as the front wheel and the handlebar
must be parallel with the font hub. The stem and handlebar should never rotate free of
the front wheel or up and down. To check secure attachment grab the wheel between
your knees and try to rotate the handlebar left or right. If you cannot succeed, the stem
and handlebar are properly secured.
Components fitted on handlebar such as brake levers, shifters or grips must not move
freely or rotate by hand.
If you do not have the experience or tools required please contact a mechanic or
bicycle shop for assistance.

TORQUE SPECIFICATIONS

Components
Front motor nuts
Rear hub nuts
Front hub nuts
Rear motor nuts
Pedal arm (alloy)
Pedal Arm (steel)
Pedals
Handlebar clamp block screw (M6)
Handlebar clamp block screw (4xM5)
Angle adjustment screw
Clamp screw stem fork shaft clamp
Handlebar bracket attachment
Brake pads
Seat post clamping ring
Saddle clamp
Tightening torque
50 Nm
25-30 Nm
25-30 Nm
50 Nm
30 Nm
30-35 Nm
30-35 Nm
10-14 Nm
6 Nm
18-30 Nm
15 Nm
20 Nm
5-7 Nm
8-12 Nm
18-22 Nm
84 - EN