EMG Lord Black Aluminium Operating Instructions Manual page 116

CONTROL DISPLAY
1.4 Lights/Backlight Button ON/OFF
With the display switched on, hold the "C"
button for 2 seconds to turn on/off the
headlight, taillight
backlight.
NOTE! If the display is powered on in a
darkenvironment the headlight, taillight
and display backlight will be turned on
automatically. If the display light is turned
off manually it will require to be turned on
manually afterwards.
1.5 Walk Asist
The ebike comes equipped with walk assist
function. This feature propels forward your
ebike with a constant speed of 6km/h
without pedaling and requires nothing but
to hold it balanced when walking along
side it. It comes very handy when needing
to push it up a steep incline.
Hold the "B" button to activate the walk
assist.
This function remains activated as long as
you hold the button and deactivates the
moment you stop holding it.
EN - 29
and the display
2. LCD control display
The LED display is located on the middle of
the handlebar and represents the system's
interface of "communication" with the
user.
A.
Maintenance
displayed based on the battery charge
cycles and riding distance. The system
automatically estimates the battery life
and gives warnings when the number of
charge cycles has exceeded the battery
life. A warning light will also come on when
the total riding distance exceeds the motor
life cycles.
B. Menu
C. Displays the current traveling speed in
km/h or mph depending on user selection.
D. Displays average speed AVG and
maximum speed MAXS.
E. Error display will come on when an error
is detected. Visit your dealer or a service
workshop in your vicinity.
F. Distance indication: display of the
distance depending on the setting.
Warning symbol is