EMG Lord Black Aluminium Operating Instructions Manual page 111

CONTROL DISPLAY
KD59E LED CONTROL DISPLAY
The LED control display operates the drive
system and is located on the handlebar on
the left side, near the grip.
1. Control Unit Function Overview
2. Operations
2.1 Butonul Start/Stop
Power Button ON/OFF
Push button for 2 seconds to switch
on/off the LED control unit and electric
drive system.
The system will automatically turn off if left
idling for more than 5 minutes.
2.2 Pedal assistance (PAS) level selection
Once turned on, the display switches to
default Level 1.
Push "+" or "-" buttons to switch between
different levels of assistance. The LED light
on top of each number indicates the level
of assistance selected.
If there is no LED light indication, it means
you are on default mode or have selected
Level 0 and the electric system does not
offer any assistance. The ebike behaves
similar to a standard bike. You will feel the
electric assistance
selecting again between Levels 1 up to 5.
2.3 Lights Button ON/OFF
With the display switched on, hold the
"+" button for 2 seconds to turn on/off the
headlight and taillight.
2.4 Walk Assist Function
The ebike comes equipped with walk
assist function. This feature propels forward
your ebike with a constant speed of
6km/h without pedaling and requires to
hold it balanced when walking along side
it. It comes very handy when needing to
push it up a steep incline.
Hold the "-" button to activate the walk
assist. This function remains activated as
long as you keep hold on the "-" button
and deactivates the moment you stop
holding it.
2.5 Battery charge level
The LED bar on top will be completely lit if
the battery is fully charged and the LED
indicators will gradually switch off when
the battery charge level starts dropping.
kicking in once
24 - EN