EMG Lord Black Aluminium Operating Instructions Manual page 123

CONTROL DISPLAY
A
Changing the cycle computer display
Switching between automatic and manual gear shifting
X
When switching assist modes: the level of assistance becomes stronger
When shifting gears: pedaling becomes heavier
Y
When switching assist modes: the level of assistance becomes weaker
When shifting gears: pedaling becomes lighter
The operation procedure provided here refers to cases where the cycle computer is set
to the default values.
Installing and removing the cycle computer
Slide the cycle computer onto the bracket
as shown in the illustration to install it.
Insert the cycle computer securely until it
clicks into place.
To remove the cycle computer, push the
lever of the bracket firmly while sliding out
the cycle computer.
If the cycle computer is not correctly in place,
the assist function will not operate normally.
Turning the power ON / OFF
Automatic power off function
If the bicycle has not moved for over 10 minutes, the power will
automatically turn off.
Turning the power ON and OFF via the cycle computer
Hold down the power button on the cycle computer for
2 seconds.
If built-in battery of cycle computer isn't charged sufficiently,
the power will not turn on.
The built-in battery of the cycle computer is charged only when
the cycle computer screen is on
36 - EN