EMG Lord Black Aluminium Operating Instructions Manual page 169

MAINTENANCE | CARE
This process requires experience and special tools and is usually covered by a mechanic
or bicycle shop.
In case of mechanically actuated disc brakes, the cables must be securely tightened by
bolts. Outer and inner cables should not show any damage.
Inspect the surface of the rotors for any grooves, deep scratches or other forms of
mechanical damage. Replace if advised by a mechanic or bicycle shop.
Lift front wheel and rotate freely to check for rotor warping. Repeat for rear wheel. When
rotating freely, the rotor should not rub on the brake pads.
CHAIN
Check visually the chain links for any damages. With the bicycle in static position, rotate
the chain set in reverse to check for any strange noises, clutches, or chain tendency to
skip off gear, sprocket or derailed pulleys.
Clean the chain periodically and apply special chain lube. Do not use any automotive
oil, vaselines or any similar products as they quickly help to cluster dust, sand, soil, etc.
There are products specifically designed for chain maintenance. Contact a mechanic or
bicycle shop for details on chain care.
GEARSHIFT
Over time, due to functional mechanical components and their complexity, the
transmission may suffer from poor alignment or stretching of drive cables.
If you experience suspicious noise or malfunction, contact a mechanic or bicycle shop to
make the necessary adjustments.
SADDLE AND SEAT POST
Check secure attachment by grabbing the saddle from both ends and try to rotate left
and right, and then to move it up and down.
If the saddle is attached correctly to the seat post, you should not be able to make it
budge.
Apply grease on the seat post end to avoid ceasing into the frame.
82 - EN