EMG Lord Black Aluminium Operating Instructions Manual page 153

CONTROL DISPLAY
*1 Traveling data can be reset by holding Assist-A while displaying [DST]. The [ODO]
information will not be reset.
*2 The battery level is not displayed while displaying [RNG]. The traveling range should be
used as a reference only.
*3 When walk assistance is functioning, the [RNG] screen display changes to [RNG ---].
*4 This item is optional. Whether to show this or not can be set by connecting E-TUBE
PROJECT. Refer to "Items Configurable in E-TUBE PROJECT" in "CONNECTION AND
COMMUNICATION WITH DEVICES."
*5 Electronic gear shifting only.
The screen will switch back to displaying the speed once 60 seconds have passed after
displaying the traveling data.
Pressing A with the speed information displayed will switch the displayed traveling data in
sequence from [DST].
Resetting the traveling distance
Reset the traveling distance displayed on the basic screen.
When the traveling distance is reset, [TME] (traveling time), [AVG] (average speed), and
[MAX] (maximum speed) will also be reset.
1. Press A to switch the traveling data display to [DST].
2. Continue to hold A until the number displayed for [DST] flashes.
3. Press A.
The traveling data is cleared.
If nothing is done for five seconds after the number for [DST] begins flashing, it will stop
flashing and the screen will return to the basic screen.
66 - EN