EMG Lord Black Aluminium Operating Instructions Manual page 110

CONTROL DISPLAY
DP E12 LED CONTROL DISPLAY
The LED control display operates the drive
system and is located on the handlebar
on the left side, near the grip.
1. Control Unit Function Overview
2. Operations
2.1 Power button ON/OFF
Push power on/off button
seconds to switch on/off the LED control
unit and electric drive system.
The system will automatically turn off if left
idling for more than 5 minutes.
2.2 Pedal assistance (PAS) level selection
Push "+" or "-" buttons to switch between
different levels of assistance. The LED light
on top of each number indicates the level
of assistance selected. If there is no LED
light indication, it means you are on
default mode or have selected Level 0
and the electric system does not offer
anyassistance.
EN - 23
The ebikebehaves similar to astandard bike.
You will feel the electric assistance kicking in
once selecting again between Levels 1 up
to 4.
2.3 Lights Button ON/OFF
With the display switched on, hold the
button for 2 seconds to turn on/off the
headlight and taillight.
2.4 Walk Assist Function
The ebike comes equipped with walk assist
function. This feature propels forward your
ebike with a constant speed of 6km/h
without pedaling and requires to hold it
balanced when walking along side it. It
comes very handy when needing to push it
up a steep incline.
Hold the
assist.
This function remains activated as long as
you keep
deactivates the moment you stop holding
it.
2.5 Bluetooth connection
The control display unit connects with your
for 2
Android smartphone via Bluetooth and uses
BAFANG GO application to collect data.
The display is also equipped with charging
port for your mobile device. BAFANG GO is
available for download on Google Play.
2.6 Battery charge level
The LED bar on top will be completely lit if
the battery is fully charged and the LED
indicators will gradually switch off when the
battery charge level starts dropping.
button to activate the walk
hold on the button and