EMG Lord Black Aluminium Operating Instructions Manual page 162

CONTROL DISPLAY
DEVRON ELECTRIC CONTROL POD
The Pod can be used without Screen display. The motor assist levels, and battery levels
are displayed on the pod by two distinct rows of LEDs.
Top row of LEDs indicate the level of assist. Bottom row of LEDs indicate the battery level..
Main Button (1)
Press and hold (2-3 seconds) main button to power on/off the electric system.
Secondary Button (2)
Push the secondary button (2) to increase the assist level (level 1 level 9).
Press and hold the button to toggle on/off lights function. This will also operate the screen
backlight on and off if equipped.
Secondary Button (3)
Push the secondary button (3) to decrease the assist level (level 9 level 1).
Press and hold the button to engage the walk assit function. Walk assist mode will cancel
once you release the button.
Reset the average speed and the last distance traveled
Press Main button (1) button to select between Distance (total) or Last distance traveled.
(the information displayed in area 1 of the LCD).
Select TRIP and then press Buttons 2 and 3 simultaneously until the displayed information is
set to 0. The total distance traveled can not be reset.
The electric bicycle is delivered with all settings for use at optimal parameters as specified
by the manufacturer and the law.
For other settings, please contact the shop where the electic bicycle was purchased
from, or the nearest specialist center.
EN - 75