Maintenance & Care - EMG Lord Black Aluminium Operating Instructions Manual

MAINTENANCE | CARE
Switch off the drive system before any repairs, maintenance and care work and remove
the battery. Danger of damage and accidents!
The ebike requires regular inspection, maintenance and servicing. Only in this way you
can ensure that it permanently complies with the safety and technical requirements to
operate properly.
The individual parts are exposed to stress during use, crashes, accidents or improper
treatment. Any kind of cracks, scratches or colour changes may indicate that the
respective part may suddenly fail. This specifically applies to bent or damaged
safetyrelevant parts, such as the frame, fork, handlebar, stem, saddle, seat post, rack, all
brake components, lights, pedals, wheels, tyres and tubes.
Never repair such defective parts and replace them only with genuine components
without delay. If no longer available, use only compatible replacement parts. A
mechanic or bicycle shop can offer the best solution in such cases.
GENERAL CARE NOTES
Ensure that no care agent, grease or oil reaches the brake linings, brake disc or tires, as
the brake performance will be severely reduced. Danger of accidents !
Never use any high pressure or steam cleaners, since this may cause damage (e.g.
Electric parts and paint damage, rust on the bearings, etc). Clean the ebike by hand with
warm water, a bicycle cleaning agent and a soft sponge.
•
Do not use aggressive cleaning agents, since they may dammage the paint. After
cleaning, apply bicycle preservation and polishing agents, especially to corrosion
susceptible parts.
In order to prevent rust, clean your ebike at regular intervals and in particular after
exposed to rain or snow, mud or dust.
80 -EN