EMG Lord Black Aluminium Operating Instructions Manual page 120

CONTROL DISPLAY
General Settings Menu
After the system is switched on, hold both
"+" and "-" buttons for 2 seconds to
access general settings menu.
TRIP DISTANCE reset TC icon is displayed.
Toggle between Y or N by pressing "+"
and "-" buttons. Default value is N.
Press MODE (M) button to store settings
and switch to contrast settings.
.
BACKLIGHT CONTRAST setting –
bL icon is displayed. Choose between
Levels 1, 2 and 3 where 3 is maximum
contrast. The default value is 1. Press "+"
or "-" to toggle between various contrast
levels.
Press MODE(M) button to store settings
and switch to km/mile conversion settings.
KM/MILE display conversion settings –
U icon is displayed. 1 stands for miles and
2 stands for kilometer. The default value is
2.
Press +/- buttons to select desired mode.
To store changes press MODE button to
store settings. The system will take you
back to trip distance reset.
To exit general settings menu hold MODE
(M) button for 2 seconds..
EN - 33
Trip Distance Clearance Settings Interface
Backlight Brightness Settings Interface
Mile and Kilometer Conversion Settings
Interface