EMG Lord Black Aluminium Operating Instructions Manual page 101

HANDLEBAR, STEM AND ADJUSTMENTS
RIGID HANDLEBAR STEM
Loosen the clamp bolt no.1 and set the handlebar stem POSITION and HEIGHT.
Tighten the clamp bolt again. Loosen the clamp spindle screw no.2 and adjust the
inclination angle of the handlebar. Tighten the bolt screw again.
STEM WITH ANGLE ADJUSTMENT
Loosen the bolt no.1 and set the handlebar stem POSITION and HEIGHT. Tighten the bolt
again according to the torque specification.
Loosen screw no.2 until blocking plate becomes loose from the grooves. Loosen the
lateral clamp screw no.3. Adjust angle of the stem and tighten bolt no.2 until safety plate
blocks in the grooves. Then tighten the bolt no.3 again according to the torque
specification.
.
HANDLEBAR INCLINATION
Loosen the 4 bolts and adjust the inclination ANGLE of the HANDLEBAR.
Tighten the bolts in the order shown, 1 to 4.
14 - EN