EMG Lord Black Aluminium Operating Instructions Manual page 149

CONTROL DISPLAY
Use the same procedure to the turn the power OFF.
Do not step on the pedal when turning the power ON/OFF.
Pressing the battery power button on a BT-E8010/BT-E8020 battery for around six seconds
will force the power OFF for emergencies.
When the main power is turned ON, a screen similar to that shown below is displayed,
and then switches to the basic screen.
This manual uses default settings for all explanations. The functions assigned to switches
when riding can be changed from those described here, by connecting to E-TUBE
PROJECT.
The right switch can be replaced with a normal shifter. In this case the right switch
functions explained below are no longer valid.
Left switch(default: assist)
When riding: Increase
assistance
Assist-X
When setting: Move cursor
or change setting
When riding: Decrease
assistance
Assist-Y
When setting: Move cursor
or change setting
When riding: Switch traveling data displayed on cycle computer
A
When setting: Switch cycle computer screen or confirm setting changes
Be sure to keep turning the crank during gear shifting.
Right switch
(default: electronic gear shifting)
When riding: Shifting up
Shift-X
When riding: Shifting
Shift-Y
down
62 - EN