Thermo Scientific 450iQ Instruction Manual page 85

Thermo Scientific
Digital I/O The Digital I/O screen provides status and alarms related to the digital
input/output module. If an item being monitored goes outside the lower or
higher alarm limit, an alarm is activated.
Use the  and  buttons to move up and down and the  and 
buttons to move left and right.
Home Screen>Settings>Health Check>Status and
Alarms>More>Digital I/O
The Digital I/O screen contains the following information:
Across:
G
Digital IO: This column lists items associated with the digital I/O.
G
Value: Displays the current value for each item.
G
Reset: Resets item.
G
Low Alarm: Displays low alarm status for each item.
G
High Alarm: Displays high alarm status for each item.
G
Units: Displays units for each item.
G
Down:
G
Solenoid 1–8: Displays whether or not the solenoid is activated by
G
showing the current in mA.
External Alarm 1–3: Displays OK/Fail for external alarms.
G
Relay Test Mode: Displays relay test mode on or off.
G
Solenoid Test Mode: Displays solenoid test mode on or off.
G
Board Communication: Displays OK/Fail for communication status.
G
Operation
Settings
3-59
450iQ Instruction Manual