Thermo Scientific 450iQ Instruction Manual page 74

Operation
Settings
H
3-48 450iQ Instruction Manual
S Converter
The H
2
converter, if installed. If an item being monitored goes outside the lower or
higher alarm limit, an alarm is activated.
Use the  and  buttons to move up and down and the  and 
buttons to move left and right.
Home Screen>Settings>Health Check>Status and Alarms>H
Converter
The Perm Oven screen contains the following information:
Across:
G
G
G
G
G
G
Down:
G
G
G
G
G
S Converter screen provides status and alarms for the H
2
H S Converter: This column lists items associated with the
2
converter.
Value: Displays the current value for each item.
Low Alarm: Displays low alarm for each item.
High Alarm: Displays high alarm for each item.
Units: Displays units for each item.
H S Temperature: Displays the current converter temperature. User
2
can adjust low and high alarm limits.
Thermocouple Open: Displays OK/Fail for thermocouple status.
Thermocouple Short: Displays OK/Fail for thermocouple status.
Board Communication: Displays OK/Fail for board communication
status.
S
2
S
2
Thermo Scientific