Fisher & Paykel OR36SDG User Manual page 44

Oven
PROBLEM
Steam coming from
oven vents at the back
of the range or inside
the oven door.
The oven fan does not
come on when the dial is
turned to LIGHT & FAN
Uneven baking.
Cooktop burners
PROBLEM
None of the burners
will light.
The ignitor keeps clicking
(continuous spark) even
when a burner has lit.
Some burners will not light.
Flames do not burn all
around the burner cap.
44
TROUBLESHOOTING
POSSIBLE CAUSES
Moisture from food evaporating
during cooking.
You are trying to use the fan
with the BROIL function.
Technical fault.
Oven not properly preheated.
Unsuitable or incorrectly
arranged bakeware.
POSSIBLE CAUSES
No power supply.
No gas.
Dirty or wet ignitor(s).
Burner parts or ignitors may be
wet, dirty, or misaligned.
WHAT TO DO
This is normal, especially if you are
cooking large quantities of food
in the oven using the BAKE + FAN
function.
The oven fan cannot not be used
with BROIL. A safety device will
prevent the fan from turning on.
Contact your Authorized Service
Center or Customer Care.
Wait until the halo around the
temperature dial has changed from
white to orange before putting
food in.
See 'Oven cooking guidelines'
for advice.
WHAT TO DO
Check that there is no power
outage in your area and that the
power supply to the range is
switched on at the circuit breaker
panel.
Check that the gas supply to the
house is working. You should hear
the gas when you turn a burner
on. If you are using bottled gas,
check that it is not empty.
Clean the ignitor(s). See 'Care and
cleaning' for instructions.
Check that the burner parts
are clean, dry, and correctly
assembled. Check that the
ignitors are clean and dry. See
'Care and cleaning' for instructions.