First Use - Fisher & Paykel OR36SDG User Manual

Control panel layout
Oven controls
Conditioning the oven
It is important to condition your oven before using it for cooking and baking. Conditioning
will burn off any manufacturing residues and ensure that you get the best results right
from the start.
Before you start:
Make sure you have removed all packaging and any cable ties used to secure the
z
shelving during transit.
Make sure all shelves are fitted in the oven.
z
Make sure all oven control dials are turned to O (OFF).
z
1 Open the oven door fully.
10

FIRST USE

Cooktop burner controls
2 In the O (OFF) position push the BAKE
& BROIL dial in as far as it will go then
turn counterclockwise to BAKE.
Check the lower burner to see if it has
z
lit. When the burner is lit you will see
blue flames through the cover in the
base of the oven.
The igniter will continue to spark for
z
a few seconds after the burner is lit.
This is normal.
If the burner does not light turn the dial
z
back to OFF and try again.
Dials may vary.
visible
flame