Summary Of Uk Declaration Of Conformity 7; Overview Of The Fortis-S Fs Encoder System With Multiple Readheads - Renishaw FORTiS-S FS Installation Manual

6

Summary of UK declaration of conformity 7

UKD 2021-00819
This declaration of conformity is issued under the sole responsibility of the manufacturer, Renishaw
plc. The object of the declaration is identified below:
Product name: FORTiS-S ™ and FS FORTiS-N
Description: Enclosed linear FS readhead and scale assembly
Part no.: Valid from: Description:
FS1-----------S---- -02 FORTiS-S
FN1-----------S---- -02 FORTiS-N
The object of the declaration described above is in conformity with all relevant UK Statutory
Instruments (and their amendments):
S.I. 2008 No. 1597 Supply of Machinery (Safety) Regulations 2008
S.I. 2016 No. 1091 Electromagnetic Compatibility Regulations 2016
S.I. 2012 No. 3032 The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012 - RoHS
and complies with the following technical standards:
EN ISO 12100:2010 Safety of machinery – General principles for design –
Risk assessment and risk reduction
EN ISO 13849-1:2015 Safety of machinery – Safety-related parts of control systems
Part 1: General principles for design (ISO 13849-1:2015)
EN ISO 13849-2:2012 Safety of machinery – Safety-related parts of control systems
Part 2: Validation (ISO 13849-2:2012)
EN 61326-1:2013 Electrical equipment for measurement, control, and laboratory use
EMC requirements
Part 1: General requirements
EN 62471:2008 Photobiological safety of lamps and lamp systems
EN IEC 63000:2018 Technical documentation for the assessment of electrical and electronic
products with respect to the restriction of hazardous substances
For the full declaration of conformity UKD 2021-00819 see:
www.renishaw.com/productcompliance
10 FORTiS-S enclosed encoder system with multiple readheads
™ enclosed encoder system
™ FS standard size enclosed linear encoders
FS narrow size enclosed linear encoders
™
Overview of the FORTiS-S FS encoder
system with multiple readheads
This system is an enclosed linear optical encoder designed for use in harsh industrial environments
where high-precision feedback and metrology are required. It is suitable for applications where
various slideway mechanisms are common to a particular linear axis and require multiple
readheads to provide feedback.
Based upon Renishaw's award-winning absolute technology, the rugged non-contact design has no
internal moving parts, such as bearings or wheeled readhead carriages, thus improving the overall
reliability. Additionally, hysteresis and backlash errors associated with mechanical contact system
designs are reduced.
In addition to enhanced breakage resistance, the robust steel scale has a coefficient of thermal
expansion similar to the base material used in the majority of machines, reducing errors due to
thermal effects whilst increasing measurement certainty.
Renishaw's patented set-up LED provides instant verification of the encoder's signal strength
and therefore its accurate alignment. This intuitive procedure significantly reduces the need for
additional peripheral diagnostics equipment during installation. When combined with Renishaw's
carefully designed installation accessories, these unique tools make installation easier and faster
compared to traditional methods, whilst building confidence in a right-first-time installation.
For information regarding FORTiS FS encoder systems with single readheads please refer to the
FORTiS-S FS enclosed encoder system Functional Safety installation guide and safety manual
(Renishaw part no. M-6725-9016).