Fitting The Drawer - AGA MERCURY AMC48DFSTB Owner's Manual

Fitting the drawer

1. To fit the drawer, pull the side rails fully out (Fig. 12.21).
2.
Carefully move the drawer back between the rails and
rest it on the side rails.
3.
At each side, hold the front of the drawer and pull the
side rail forward so that the clips click into position,
holding the drawer to the side rails (Fig. 12.22).
INSTALLATION
Check the appliance is electrically safe when you have finished.
Make sure the inner
rail is pulled forwards
35
Fig. 12.21
Fig. 12.22