12. Fitting the flue, flue vent and side panels
Fitting the knobs
1.
Gently push-fit the control knobs onto the spindles.
Fitting the flue
1.
Remove the four screws from the broiler flue opening
(Fig. 12.1).
2.
Present the removable flue up to broiler flue opening.
Make sure that the bottom flange of the removable flue
fits inside the fixed flue, secure in place with the four
screws (Fig. 12.1).
Fitting the flue vent
1.
Loosen the three nuts and bolts in the back of the
hotplate (Fig. 12.2).
2.
Fit the flue vent over the bolts and slide down (Fig.
12.2). Tighten the nuts to secure.
INSTALLATION
Check the appliance is electrically safe when you have finished.
Checking the parts:
Flue
Fan Assembly
Flue
29
Flue Vent
Control knobs x 9
Fig. 12.1
Fig. 12.2