Refitting The Grille And Drawer - AGA Professional 90 Dual Fuel User Manual & Installation & Service Instructions

Check the appliance is electrically safe and gas sound when you have nished.
Fig.8-12
Fig.8-13
Make sure the inner
rail is forwards
Fig.8-14
1/2" (13 mm)
Approx.
CONVERSION

Refitting the Grille and Drawer

Refitting the Flue Grille
Locate the grille onto the ue and secure to the cooktop with
the 5 screws supplied (Fig.8-12).
Refitting the Storage Drawer
Slide the inner side rails out until fully extended (Fig.8-13).
Lift the drawer at its sides and locate one of the drawer rails
(approximately ½ (15 mm)) onto an inner side rail (Fig.8-14).
Rotate the drawer to locate the remaining drawer rail onto
the opposite inner side rail.
Carefully slide the drawer back into the cavity. Some
resistance will be felt as the drawer rails locate fully onto the
inner side rails.
Check the appliance is gas sound.
n n
Check the operation of all the burners.
n n
40