Table of Contents
Advertisement
Quick Links
AGA TC / DC HOTCUPBOARD
with Warming Plate
Model No. - AHC
Owners Manual
(consisting of Installation & Users Instructions)
REMEMBER: when replacing a part on this appliance, use only parts that conform to the
safety and performance specification that we require. Do not use reconditioned or copy
parts that have not been clearly authorized by AGA.
PLEASE READ THESE INSTRUCTIONS BEFORE USING THIS APPLIANCE
IMPORTANT : SAVE INSTRUCTIONS FOR THE LOCAL INSPECTORS USE
AND FUTURE REFERENCE
IMPORTANT : CONSERVOR CES INSTRUCTIONS POUR REFERENCE FUTURE
For use in USA / Canada
02/16 EINS 517301
Advertisement
Table of Contents
Related Manuals for AGA AHC Series
Summary of Contents for AGA AHC Series
- Page 1 REMEMBER: when replacing a part on this appliance, use only parts that conform to the safety and performance specification that we require. Do not use reconditioned or copy parts that have not been clearly authorized by AGA. PLEASE READ THESE INSTRUCTIONS BEFORE USING THIS APPLIANCE...
-
Page 3: Table Of Contents
Contents 1. Product Safety 7. Wiring Diagram 2. A Brief Description 8. Warranty AGA TC / DC Hotcupboard Welcome with Warming Plate Peace of Mind Distribution and Service Network 3. Cleaning and Caring Regular Servicing Important Instruction Service Intervals 4. Service... -
Page 5: Product Safety
1. Product Safety Meaning / Description Symbol Signification / Description WARNING / CAUTION AVERTISSEMENT Une consigne de sécurité appropriée An appropriate safety instruction doivent être suivies ou garde d’un should be followed or caution to a danger potentiel exists. potential hazard exists. TENSION DANGEREUSE DANGEROUS VOLTAGE Pour indiquer les dangers... -
Page 6: Important Safety Instructions
Important Safety Instructions INCORRECT USE OF THIS RANGE CAN INCREASE THE RISK OF FIRE, ELECTRIC SHOCKS OR INJURY TO PERSONS. PLEASE READ THE FOLLOWING PRECAUTIONS TO REDUCE THESE RISKS. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Page 7: A Brief Description
2. A Brief Description AGA TC / DC Hotcupboard with Warming Plate Fig. 2.1 Warming Plate Hotcupboard ON / OFF Simmering oven Warming oven The Hotcupboard (Fig. 2.1) has the following features: Warming Plate (Hotcupboard) The warming plate is the ideal resting place for cooked food. - Page 8 ” H x 14 “ W) Warming Plate is perfect for keeping food warm prior to serving. When using your AGA to serve food, buffet style, the warming plate alleviates the need for a chafing dish. Keeping your food temperate and free from drying out.
-
Page 9: Cleaning And Caring
Top Plate and Front Plate The easiest way to clean the AGA top plate and front plate is DO NOT IMMERSE THE DOORS IN WATER AS THEY ARE to mop up spills as soon as they happen. It maybe useful to PACKED WITH INSULATING MATERIAL WHICH WILL BE keep a damp cloth handy to do this. -
Page 10: Service
For continued efficient and safe operation of this appliance, it is important that servicing is carried out at regular intervals as recommended by your AGA Retailer. The cooker should be turned OFF in advance of the service so that the appliance will have cooled down sufficiently. -
Page 11: Health & Safety
Children should be supervised to ensure that they do not play with the appliance. PLEASE READ THE ACCOMPANYING WARRANTY Any alteration that is not approved by AGA could invalidate the approval of the appliance, operation of the warranty and could also affect your statutory rights. -
Page 12: Delivery And Installation
The installation of the range must be in accordance with The AGA TC / DC Hotcupboard arrives on 1 pallet and attaches the relevant requirements of the local Wiring and Building to an existing TC or DC range, creating a seamless 5-oven or Regulations. -
Page 13: Appliance Dimensions
Appliance Dimensions Fig. 6.1 OVERHEAD CUPBOARD DESN 516848 A mm 1478 951 680 1388 760 1145 698 760 330 inch 58 36 26 Range Dimensions When surveying for a range installation the actual clearance required for the ‘body’ of the appliance should be increased by 3/8”... -
Page 14: Installation
The front plinth cover is removable and must not be If the AGA is to be installed in a brick recess, then the obstructed by flooring or tiles. If necessary the range must be minimum clearance should be increased by at least 3/8”... - Page 15 Fig. 6.2...
-
Page 16: Connection To The Power Supply
5-15P) (with the exception of AGA Hotcupboard with be plugged directly into a proper receptacle. Do not cut or Cooktop model. Please refer to AGA Cooktop instructions for remove the grounding prong from this plug. power supply requirements). -
Page 17: Mains Supply Location
Mains Supply Location Fig. 6.3 Hotcupboard power supply Mains cable fed from control tray left or right exit through ducting dependent upon position of supply socket DESN 516562 Fig. 6.4 Rating label located behind plinth, pull to remove, The mains supply connect point must be within the zones shown DESN 516590 A... -
Page 18: Installation
Installation NOTE: The AGA TC / DC hotcupboard should arrive with the Detach hotcupboard from plinth by removing two screws and tongue bracket from plinth (see Fig. 6.5), top plate in a jacked up position. This is to allow the complete... - Page 19 (See Fig. 6.8). outer face of plinth. Ensure locking screw is located into AGA Total Control / Dual Control plinth but not fully tightened. A gap of approximately ”...
- Page 20 Run a straight edge along the front of the AGA Total When satisfied both plinths sit squarely, jacking screws can Control / Dual Control plinth, to ensure the front face of be tightened until they just make contact with the AGA Total...
- Page 21 Fig. 6.11 DESN 516552 The hotcupboard top plate is set 1/4” (5mm) higher than the AGA Total Control / Dual Control top plate. This is to prevent damage to the enamel during installation. Lower the top plate using the adjusters (see Fig.
- Page 22 1/4” (5mm), the top plate the required height, making sure that the top sits level can now be removed easily without causing damage to the and matches the height of the AGA Total Control / Dual enamelled surfaces. Control (see Fig. 6.13).
- Page 23 AGA Total Control / Dual Control 13. Once the handrails are locked in position, fit the plinth facia leaving no gap between. Make sure that the handrail endcaps.
-
Page 24: Wiring Diagram
7. Wiring Diagram - AGA TC / DC Hotcupboard Fig. 7.1 Caution: Label all wires prior to disconnection, when servicing controls wiring errors can cause improper and dangerous operation. Verify proper operation after servicing... -
Page 25: Warranty
What is not included in the guarantee Welcome • Consumable parts Thank you for choosing an AGA range. We are sure that you • Flues (except integral power and balanced flues). will be impressed with the performance of your new AGA range and with the ongoing service you will receive. -
Page 26: Regular Servicing
Regular Servicing Flues, Ventilation and External Services: Regular maintenance is an essential part of keeping your AGA External services, gas supply, external oil lines, tanks and range running safely and efficiently. filters are not covered under this warranty. Since your AGA can operate continuously it is important to... - Page 27 Notes...
- Page 28 For further advice or information contact your local AGA Specialist With AGA Marvel’s policy of continuous product improvement, the Company reserves the right to change specifications and make modifications to the appliance described and illustrated at any time. Supplied by AGA Marvel 1260 E.
Need help?
Do you have a question about the AHC Series and is the answer not in the manual?
Questions and answers