Fitting The Bottom Panel (Toe Kick) - AGA MERCURY AMC48DFSTB Owner's Manual

Fig. 12.17
Side panel
Pin
Nylon Locating
washer
Side view of the front base
Fig. 12.18
Side panel
Side view of the front base
Fig. 12.19
Fig. 12.20
INSTALLATION
Check the appliance is electrically safe when you have finished.
Toe kick
Bottom panel
Toe kick
Bottom panel
Fitting the bottom panel
1. Tilt the bottom of the panel slightly to locate the lower
slots onto the washers (Fig. 12.17). Now rotate the
panel to fit over the pins (Fig. 12.18).
2.
Using the two screws and allen key supplied, loosely
fit the bottom panel onto the mounting brackets (Fig.
12.20). DO NOT tighten at this stage.
3.
Adjust the bottom panel to set the gap between the
side panels and doors equally (Fig. 12.19). When it is
positioned correctly, use a suitable flat open-ended
spanner to tighten the bracket screws, and then tighten
the bottom panel screws (Fig. 12.20) with the allen key
provided.
34
(toe kick)