Fitting The Side Panel Rear Retaining Brackets - AGA MERCURY AMC48DFSTB Owner's Manual

Checking the parts:
Side panel rear retaining brackets
A052064 - Right-hand
A052067 - Left-hand
Obscuring Trim Side Panel x2
Q050718
Bottom Panel (Toe kick)
Front Mounting Brackets
Q050877 - Left-hand
Q050878 - Right-hand
Rear left
Base Frame
INSTALLATION
Check the appliance is electrically safe when you have finished.
Side panels
A051761 - Right-hand
A051759 - Left-hand
Bottom Panel (Toe kick)
Color matched to range
Screws supplied
2x Machine Screw
2x Self-Tapping Screw
Fitting the side panel rear
retaining brackets
1. Located at the bottom left and right rear corner of the
range, remove the two screws (Fig. 12.8).
2.
Fit the left and right retaining brackets to the base
frame and refit and tighten the screws (Fig. 12.8).
Base Frame
Note the position
of locating washer
31
Fig. 12.8
Rear right