Setting Up Projector Profiles; Creating A New Projector Profile; Importing A Projector Profile; Restoring Settings From A Profile - Christie Mirage SST User Manual

Setting up projector
profiles
Use the projector profiles to store configured settings so you can switch between the profiles as
required.

Creating a new projector profile

Save the projector configuration to a profile so you can revert to those saved settings any time. You
can save up to 10 projector profiles.
1. Configure the projector settings you want to save to the profile.
2. Select MENU > Admin > Projector Profiles.
3. Select an empty profile.
4. Select New Profile.
5. Select Save.

Importing a projector profile

Import projector profiles set on different projectors using a USB flash drive.
1. Insert the USB flash drive containing the projector profile file into the USB port on the
projector.
2. Select MENU > Admin > Projector Profiles.
3. Select an empty profile.
4. Select Import From File.
5. From the File Selection dialog, select a projector profile file.
The projector profile file is imported to the projector.

Restoring settings from a profile

Return the projector to the configuration specified in a specific projector profile.
1. Select MENU > Admin > Projector Profiles.
2. Select an existing profile.
3. Select Restore Profile.
4. From the Restore dialog, select the settings you want to restore.
5. Select Restore.
Mirage SST User Guide
020-102993-01 Rev. 1 (06-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
49