Table of Contents
Advertisement
82
OPERATION
ATTENTION
Turning on off-road mode
(ENDURO and ENDURO
PRO) when in road mode
Risk of falling due to unstable
riding conditions when brak-
ing or accelerating in the ABS
or DTC control range
Switch on off-road mode
(ENDURO and ENDURO
PRO) during off-road rid-
ing only.
Press button 1 repeatedly un-
til the desired riding mode is
displayed.
with riding modes Pro
In the factory setting, the
ABS control for the rear
wheel is deactivated when the
ENDURO PRO riding mode is
active.
with riding modes Pro
the intervention of electronic
stability control systems can be
restricted.
Possible restrictions are dis-
played as a pop-up message,
e.g.
ting.
The ABS indicator light flashes
irregularly.
You can find more detailed in-
formation regarding road han-
dling control systems such as
ABS in the chapter "Technol-
ogy in detail".
When the vehicle is stationary,
the selected riding mode is
activated after approx. two
seconds.
The new riding mode is ac-
tivated while the vehicle is in
motion under the following
conditions:
The throttle grip is in idle po-
OE
sition.
Brake is not engaged.
Adaptive cruise control is not
active.
The riding mode selected and
its associated adjustments of
engine characteristics DTC,
ABS and MSR are retained
Depending on the riding
mode or its configuration,
Caution! ABS set-
.
OE
Advertisement
Chapters
Table of Contents
