Table of Contents
Advertisement
Go to the last menu used
In Pure Ride view: Press and
hold the bottom of the MENU
rocker button.
The last used menu is called
up. The last marked entry is
selected.
Operating focus change
with preparation for naviga-
tion system
OE
When the Navigator is con-
nected, you can switch be-
tween the operation of the
Navigator and the TFT display.
Changing the operating focus
with preparation for naviga-
tion system
OE
Securely fasten the navigation
device. (
225)
Show Pure Ride view.
(
101)
Press and hold the top of the
rocker button MENU.
Operating focus changes
to the Navigator or the TFT
display. The active device
is marked in the upper left
status line. Operating actions
affect the active device
until the operating focus is
changed again.
Operating the navigation sys-
tem (
227)
System status displays
The system status is displayed
in the lower menu area when a
function has been turned on or
switched off.
Example of the meaning of
the system statuses:
System status 1: DTC func-
tion is turned on.
Changing the display for rider
info. status line
Requirement
The vehicle is stationary. The
Pure Ride view is displayed.
Turn on the ignition. (
All of the information neces-
sary for operating the vehicle
on public roads is made avail-
able from the on-board com-
puter (e.g.
TRIP 1
travel on-board computer (e.g.
) in the TFT display.
TRIP 2
The information can be dis-
played in the upper status
line.
103
64)
) and the
Advertisement
Chapters
Table of Contents
