Table of Contents
Advertisement
58
DISPLAYS
Hill Start Control is
automatically deactivated
blinks yellow.
Possible cause:
Hill Start Control was deacti-
vated automatically.
Side stand was folded out.
Hill Start Control is deacti-
vated when the side stand is
folded out.
Engine was stopped.
Hill Start Control is deac-
tivated when the engine is
stopped.
Operate Hill Start Control.
(
87)
Hill Start Control cannot be
activated
is displayed.
HSC not available. En-
gine not running.
Possible cause:
The Hill Start Control can not
be activated.
Fold in side stand.
Hill Start Control only func-
tions when the side stand is
folded in.
Start engine.
Hill Start Control only func-
tions with the engine running.
Gear not trained
with Gearshift Assistant Pro
Gear indicator flashes.
Possible cause:
with Gearshift Assistant Pro
The transmission sensor has
not been completely taught in.
Engage idle position
allow the engine to run for
at least 10 seconds while
parked to train the idle po-
sition.
Shift all gears with clutch con-
trol and ride for at least 10
seconds in each engaged
gear.
The gear display stops flash-
ing when the transmission
sensor has been successfully
taught in.
If the transmission sensor is
completely trained, the Gear
Shift assistant Pro functions
as described (
If the transmission sensor
has been programmed com-
pletely, the gearshift assis-
tant will operate as described
If the teach-in procedure is
unsuccessful, have the fault
corrected at a specialist work-
shop, preferably an authorized
BMW Motorrad retailer.
OE
OE
and
N
176).
Advertisement
Chapters
Table of Contents
