Spring Preload - BMW Motorrad R 1250 GS Adventure 2022 Rider's Manual

Take off the seat and set it
on a clean surface with uphol-
stered side facing down.
Observing height adjustment
The front height adjustment 1
must always be set to the
high position (marked H).
The rear height adjustment 1
must always be set to the low
position (marked L).
Installing the Rallye seat
Insert the Rallye seat 1 into
the receptacles 2 on the left
and right and then press for-
ward and downward in the
rear area until the lock audibly
engages.
To remove and install seat
with optional equipment,
see the vehicle rider's manual.

SPRING PRELOAD

without Dynamic ESA
Setting
It is essential to set the spring
preload to suit the load carried
by the motorcycle. Increase
spring preload when the ve-
hicle is heavily loaded and re-
duce spring preload accord-
ingly when the vehicle is lightly
loaded.
135
OE