Table of Contents
Advertisement
78
OPERATION
Press button 1 briefly to
display current setting.
Immediately after the button 1
is pressed, the chassis and
suspension adjustment op-
tions for damping 2 and spring
preload 3 are displayed.
To adjust the damping rate:
Repeatedly press button 1
briefly until the desired setting
is displayed.
The damping cannot be
adjusted while the motor-
cycle is being ridden.
The selection arrow 4 is dis-
played.
The selection arrow 4 goes
away after the changeover of
the status.
The following settings are avail-
able:
: Damping for comfort-
Road
able road travel
: Damping for
Dynamic
dynamic road travel
: Damping for
Enduro
off-road riding. Only
available in the ENDURO
or ENDURO PRO riding
modes, and cannot be further
adjusted in these riding
modes.
The following message is dis-
played if no adjustments are
possible in the selected rid-
ing mode:
In ENDURO rid-
ing mode damp. not ad-
justable.
Advertisement
Chapters
Table of Contents
